1 | Introduction | |||
2 | Continuous casting for rolling | |||
3 | Liquid steel from casting ladle | |||
4 | From intermediate vessel in mold | |||
5 | Continuous from the mold | |||
6 | Cooling chamber with roller conveyor | |||
7 | Straighten and cut steel strand | |||
8 | Dimensions close to profile | |||
9 | Components shown are: | |||
10 | Pouring ladle | |||
11 | Liquid steel | |||
12 | Intermediate vessel | |||
13 | Water-cooled copper mold | |||
14 | Water cooled copper mold | |||
15 | Immersion tube | |||
16 | Slag | |||
17 | Mould | |||
18 | Solidified steel | |||
19 | Liquid steel | |||
20 | Cooling chamber | |||
21 | Deflection roller conveyor | |||
22 | Driving straightener | |||
23 | Running along cutting torch for cutting to length | |||
24 | Steel strand, rolled strand |